Product Description
No plastic parts in the pump
*(Shown with optional strainer)
Model GP-612-24H is a self-priming, compact, powerful, 24 VDC electric gear pump. Constructed with helical cut bronze gears, nickel-plated brass body and stainless steel shafts. Suitable for Diesel fuel transfer, Transmission fluid, Light weight lube oils, Water, Antifreeze etc.
THE PUMP IS REVERSIBLE. It can be operated in any direction by reversing the polarity, or it can be wired to a reversing switch.
The pump has IP55 protection rating
EN 55014-1 Electromagnetic emission compatibility
Ports: Tapped 1/2" BSPP, pump supplied with 2 1/2” NPT adapter fittings
Motor: 24VDC, powder epoxy coated body
Circuit Protection: Install fuse: "slow blow" 24V - 15A
* ISO-16949 and ISO-16750-2 suggest that electrical tests should be performed with 28V supply for 24V-products (and with 14V supply for 12V-products) since the battery voltage is 28VDC while the engine is running.
Current: See Graphs
Flow Rate: 10 GPM
Run dry time, up-to 30 min
Self Priming With Wet Gears: 13 ft (4 m)
Working pressure: 36psi
Motor Life: Approx. 2000 hours
Max. Ambient Operating Temperature: 14-140°F (-10-60°C)
Pump Body: Nickel plated Bronze
Gears:Bronze
Shafts: Stainless Steel
Seals: Viton.
DO NOT USE for gasoline, flammable liquids liquids, food products, corrosive chemicals & solvents.
Weight: 9.5 lbs
* A model with lower operating speed is available for lubricating oils and viscous liquids.
Warranty Information
* The warranty period is 2 years from the date of purchase on the invoice.
The warranty covers only production defects
It does not cover altered, abused, or improperly installed pumps.
The warranty does not cover any installation expenses involved.