Product Description
No plastic parts
This pump has the same 2 gpm capacity but larger motor for heavy duty applications. Will transfer engine oil, transmission fluid, diesel fuel, antifreeze etc. Fully reversible and it will run equally well in both directions. Self priming up-to 5 feet with "wet" gears. 3/8" NPT male Nickel platedbrass fittings on both sides are standard.
Optional -4,-6AN,-8AN and 1/2" Hose Barb adapters available in the "accessories" page. Viton seals and Nickel plated pump housing. These pumps have been field proven and used in production military vehicles and the Navy.
IP-67 Rating
Flow rate: 8LPM / 2.1GPM at 25C / 77F with SAE-30 oil, and 13mm / 1/2" ID hose. Flow rate reduced to 1.2LPM / 0.3GPM with 8mm / 3/8" ID hose.
*
ISO-16949 and ISO-16750-2 suggest that electrical tests should be performed with 28V supply for 24V-products (and with 14V supply for 12V-products) since the battery voltage is 28VDC while the engine is running.
Weight 6.8 lb
Draw: 24V-7.5A
Working pressure 25 psi
Self priming (lift) to 5 feet
Run dry time, up-to 20 min
Viton seals and Fluoroelastomer lip seal
Warranty Information
* The warranty period is 2 years from the date of purchase on the invoice.
The warranty covers only production defects
It does not cover altered, abused, or improperly installed pumps.
The warranty does not cover any installation expenses involved.
